5 Ton Bench Manual H-Frame Hydraulic Press
In stock
Model No
9661617
$1,071.00
- Pressure gauge for direct pressure readings
- Easily adjustable table for quick height changes between applications
- Holes in side frames allow for insertion of long material
- Hand operation for economic performance
- Efficient hand pump is conveniently located for reduced operator fatigue
- Fully-welded heavy steel plate frame for maximum rigidity
- Factory preset relief valve to prevent exceeding maximum pressure capacity
- By-pass hole prevents excessive ram extension
- Rapid ram return starts as soon as release valve is opened and may be stopped at any point by closing the valve
- Single acting cylinder design for improved operation
- Table Weight Capacity: 500lbs
- Adj. between Table Pin to Holes: 4.72 in
- Distance between channels: 3.39 in
- V-Block Weight: 6.6 lbs
Product Details
Palmgren's Hand Operated 5-Ton H-Frame Presses are constructed from heavy duty steel plate that is welded together. The combination of rigid construction and industrial grade hydraulics make Palmgren's 5-Ton H-Frame presses the ultimate solution for the serious fabrication and machine shop owner who demands only the best quality from his operation.
| Application | Fabrication |
|---|---|
| Base Dimension | 15.7 x 26 |
| Country of Origin | CN |
| Cylinder Type | Manual Hydraulic |
| H-frame Press Type | Electronic Pump |
| Lever Ratio | 400/1 |
| Max. Distance Ram to Table | 15.8" |
| Max Pressure | 5-Ton |
| Overall Dimensions (LxWxH) | 30" x 15.7" x 36.5" |
| Press Type | H-frame Presses |
| Ram Diameter | 1.57 |
| Table Weight | 22 |
| Warranty | 3 Year |
| UPC | 726896616179 |
| Unit of Measure | EA |
| Product Height (in) | 44.5 |
| Product Length (in) | 20.5 |
| Product Width (in) | 23 |
| Product Weight (lbs) | 190 |
Write Your Own Review
