- Built on the same cross-slide base as our cross-slide tables
- Feed screws are precision cut acme threads
- Dials are graduated in 0.001 in increments
- Counter-balance steel ball crank handles that clear the machine table
- Easily convert from a cross slide vise to a traditional vise by simply removing the screws and the base
Product Details
This unit accurately moves the work in two directions along the X and Y axis. This is idea for positioning form one machine location to another without losing squareness or alignment. The cross slide vise gets its strength from the 30,000PSI tensile strength fine grain cast iron it's made from. This USA made vise comes with a lifetime guarantee.
| Jaw Type | Grooved |
|---|---|
| Jaw Opening | 3" |
| Jaw Deflection | 0.002" @ 2000 lbs. |
| Cross Slide Travel | 4" x 4" |
| Vise Type | Drill Press |
| Jaw Width | 3" |
| Vise Material | Iron |
| Vise Jaw Material | Steel |
| Vise Height | 5-1/2" |
| Throat Capacity | 1-3/4" |
| Drill Press Vise Type | Cross slide |
| Product Width (in) | 14.3 |
| Product Weight (lbs) | 29 |
| Product Length (in) | 14 |
| Product Height (in) | 6 |
| Unit of Measure | Each |
| Brand | Palmgren |
| Country of Origin | TW |
| UPC | 726896303017 |
| Warranty | Limited Lifetime |
| Application | Drilling |
| Master Pack Width (in) | 14.25 |
| Master Pack Weight (lbs) | 29 |
| Master Pack Length (in) | 14.38 |
| Master Pack Height (in) | 6 |
| Master Case Pack Qty | 1 |
| Model Number | 32 |
Write Your Own Review