11"X27" Bench Combo Lathe and Vari-Speed Mill

In stock
Model No
11"X27" Bench Combo Lathe and Vari-Speed Mill

Product Details

Palmgren's combination 11" bench engine lathe and gear head mill delivers the precision, power and versatility to handle a wide range of turning, milling and drilling operations normally found in much larger machines. Heavy cast iron construction, smooth power transmission with precision thrust and ball bearings in the head stock and spindles, hardened and ground ways all designed to go give you years of trouble-free, precise turning, milling and hole making machining. Built and inspected to the DIN 8606 toolmakers precision lathe standard assuring accuracy and consistent performance. The all gear drive transmission on the mill delivers full power at any speed driving the cutting tools at nearly 100% of available horsepower and torque. With such a wide range of versatility and features, this all-purpose combination lathe/mill is one of the most function manual machine centers that can operate in all types and sizes of shops.
More Information
4 Position Tool Post Height 1/2 in.
Bed Width 7.09 in
Chuck Size 5 in
Compound Travel 5.60 in
Country of Origin CN
Distance Between Centers 27"
Dist. Btwn. Cntr. & Comp. Tab. 3.49 in
Drilling Capacity in Cast Iron 0.63 in
Gear Stages 2
High Range 100 - 2900
Lathe Height 24.80 in
Lathe Length 54.72 in
Lathe Motor 1 HP / 115 V / 60HZ / 1PH
Lathes Type Gear Head
Lathe Weight 440.93 lb
Lathe Width 27.56 in
Longitudinal Feed Rates 0.07 - 0.1 - 0.2
Low Speed 50 - 1400
Max Turning Diameter 11.02 in
Mill Height 33.85
Mill Length 26.38
Mill Motor 1 HP / 115V / 60HZ/ 1PH
Mill Weight 227.08
Mill Width 21.65
Milling Cap Inserted Tooth Cut 2.48 in
Milling Cap End Mill Cut (max) 0.79 in
Number of Spindle Speeds 6
Pitch 8 - 56 in
Spindle Holding Fixture MT2/M10
Table Dimensions 19.69 in x 7.09 in
Spindle Hole 1.02 in
Spindle Travel 1.97 in
Swiveling +/- 90°
Tailstock Sleeve Travel 4.13 in
Tailstock Taper MT2
Top Slide Travel 2.43 in
T-Slot Size/Distance/Quantity 0.47 in / 2.48 in / 3
Working Radius 7.28 in
Warranty 3 Year
Z-Axis Travel 14.57 in
UPC 726896845203
Unit of Measure Each
Product Height (in) 39.5
Product Length (in) 54
Product Width (in) 29.5
Product Weight (lbs) 550
Write Your Own Review
You're reviewing:11"X27" Bench Combo Lathe and Vari-Speed Mill
2024 © Palmgren (a C.H. Hanson brand) - All rights reserved. No portion of this site including text, graphics, image, icons or other elements may be copied or used without the expressed written consent of C.H Hanson. We make our best efforts to ensure specifictions and product information is accurate. We assume no responsibility for information errors.